Horizon LabsHorizon Labs
Back to Insights
19 Nov 2026Updated 19 Nov 20269 min read

Telematics and IoT Data Pipelines for Usage-Based Insurance

A practical engineering guide for Australian insurtechs building telematics and IoT data pipelines for usage-based insurance products — covering ingestion, feature engineering, scoring, claims integration, and privacy obligations.

Telematics and IoT Data Pipelines for Usage-Based Insurance

Usage-based insurance (UBI) products live or die on the quality of the data pipeline behind them. A pricing model built on sound actuarial logic is only as good as the telemetry feeding it — and for most Australian insurtechs, the hard engineering problem isn't the pricing model at all. It's getting high-volume, high-frequency sensor data from a vehicle, wearable, or home IoT device into a form that's trustworthy, timely, and auditable.

This guide walks through the architecture decisions that matter: ingestion, transformation, feature modelling, and the governance obligations that come with handling behavioural data under Australian privacy law.

What is usage-based insurance and why does it depend on data pipelines?

Usage-based insurance is a pricing model where premiums are calculated, in whole or in part, from observed behaviour or usage — such as kilometres driven, braking patterns, time of day, or equipment run-hours — rather than static risk proxies like age or postcode. The pricing engine is only ever as accurate as the data pipeline delivering clean, correctly-timestamped signals to it. Get the pipeline wrong and you're pricing on noise.

Unlike a traditional actuarial model that recalculates premiums annually from a handful of static variables, UBI pipelines are continuous systems. They ingest events in near-real-time, apply quality checks, derive features, and feed both pricing and claims workflows — often from the same underlying stream. That's a materially different engineering problem to the batch ETL most insurers' legacy systems were built around.

What does a telematics and IoT data pipeline actually need to do?

At minimum, the pipeline needs to ingest device events reliably, validate and enrich them, derive risk-relevant features, and make those features available to both the pricing model and the claims system — without losing lineage back to the raw signal. Telematics is the use of sensors, GPS, and onboard diagnostics to capture and transmit data about a vehicle's or asset's location, movement, and condition.

Five responsibilities sit inside almost every UBI pipeline:

  • Device ingestion — accepting event streams from telematics hardware, smartphone SDKs, or third-party aggregators (OEM data feeds, fleet management platforms).
  • Validation and deduplication — GPS drift, dropped packets, and duplicate transmissions are routine; the pipeline has to catch these before they reach a pricing model.
  • Feature derivation — converting raw accelerometer and GPS traces into risk signals: hard-braking events, cornering force, speed relative to posted limits, time-of-day exposure, trip classification.
  • Storage with lineage — every derived feature needs to be traceable back to the raw event that produced it, for both model debugging and claims disputes.
  • Serving — exposing features to pricing engines in near-real-time and to claims systems on demand, often years after the original trip.

How should insurtechs ingest high-volume sensor data?

Ingestion should be built around an event-streaming architecture that can absorb bursty, high-volume telemetry without blocking on downstream processing. Event streaming is a pattern where data is published as a continuous sequence of discrete events, consumed independently by multiple downstream systems. This decouples the device layer from the analytics and pricing layer, which matters because telematics devices don't wait for your data warehouse to be ready.

Over-the-shoulder view of a person at a laptop and monitor showing scrolling data streams, in a bright daylight-filled office with a whiteboard sketch in the background.

Most telematics data arrives as small, frequent payloads (GPS fixes every few seconds, accelerometer samples at higher frequency again) from devices with inconsistent connectivity. A pipeline needs to tolerate out-of-order arrival, buffer during connectivity gaps, and reconcile late-arriving data against trips that may already have been scored. This is materially different to typical application event volumes, and it's one of the more common reasons insurtechs underestimate the platform engineering effort involved before a single pricing model is trained.

For insurtechs working with a legacy policy administration system, this often means running the telematics pipeline as a parallel, modern data path rather than retrofitting the old core — a pattern similar to the strangler fig approach used in broader application-modernisation work, where new capability is built alongside the legacy system and traffic is migrated incrementally.

How is raw telemetry transformed into pricing-ready features?

Raw sensor data has to pass through validation, trip segmentation, and feature engineering before it's usable by an actuarial or ML pricing model — this transformation layer is typically where most of the pipeline's engineering effort and ongoing maintenance cost sits. A feature store is a system that computes, stores, and serves these derived variables consistently to both training and production pricing environments, avoiding the common failure mode where a feature is calculated one way for model training and a slightly different way in production.

Typical derived features for motor UBI include:

  • Harsh braking and acceleration event rates, normalised by distance or time
  • Cornering and swerve force
  • Speed relative to posted limits (requires a road-speed reference dataset)
  • Night-time and peak-hour exposure proportion
  • Phone distraction proxies (where permitted and disclosed)
  • Trip purpose classification (commute, long-haul, short urban trips)

Consistency matters more than sophistication here. A simpler feature set calculated the same way every time will outperform a more elaborate one that drifts between model versions.

What does a driving-behaviour or usage scoring model look like?

A usage or behaviour score is a composite index, derived from the feature set above, that summarises relative risk for pricing purposes — it is not a replacement for actuarial judgement but an additional input to it. Most production UBI models combine a handful of behavioural features with traditional rating factors rather than relying on behavioural data alone, partly because behavioural signal needs a reasonable observation window before it's statistically meaningful, and partly because regulators and reinsurers expect the pricing logic to remain explainable.

This is where insurtechs frequently either over-invest or under-invest. Building a bespoke deep-learning model on sparse telemetry before you have enough trip-level data to validate it is a common early misstep; so is treating the scoring model as a one-off data science project rather than a system that needs monitoring, retraining, and drift detection once it's in production. Our view, covered in more depth in our insights, is that the scoring model should be designed alongside the pipeline from day one — not bolted on afterwards.

How do you handle claims data alongside telematics streams?

Claims and telematics data need to be joinable at the trip and policy level, with enough lineage to reconstruct exactly what the vehicle or device was doing at the time of an incident — this is often the single most valuable (and most under-engineered) part of a UBI platform. When a claim is lodged, the claims team needs fast, reliable access to the relevant trip's raw and derived data, not just a summary score computed weeks or months earlier.

This has two practical implications for pipeline design. First, raw telemetry needs to be retained for long enough to cover your claims and dispute window, which for motor insurance in Australia can extend well beyond the policy period. Second, the data model needs a stable join key between policy, device, trip, and claim that survives device swaps, policy renewals, and customer changes — a detail that's easy to under-design early and expensive to retrofit later.

What are the data governance and privacy considerations for Australian insurtechs?

Telematics and IoT data is personal information under the Privacy Act 1988 (Cth), and location and behavioural data attracts particular scrutiny from the Office of the Australian Information Commissioner (OAIC) because of its sensitivity and re-identification risk. Insurers and insurtechs need to handle collection notices, consent, and data minimisation deliberately — not as an afterthought bolted onto a working pipeline.

A person works alone at a desk in a dimly lit office, their face lit by monitor glow and a warm desk lamp, reviewing documents late in the evening.

For APRA-regulated entities, information security obligations under CPS 234 extend to third-party telematics vendors and data processors in the pipeline, which means vendor due diligence and data flow mapping need to happen before a device integration goes live, not after. Alignment with ISO/IEC 27001 controls is a reasonable baseline for the storage and access layers handling raw location data. Practically, this means:

  • Clear, specific collection notices covering what telematics data is captured and why
  • Data minimisation — don't retain raw GPS traces longer than needed for pricing, claims, and dispute resolution
  • Access controls and audit logging on raw location data, separate from the broader data platform
  • A documented data flow map covering every third party (device manufacturer, MVNO, aggregator) that touches the data before it reaches you

Build, buy, or blend — what's the right approach for a telematics pipeline?

Most Australian insurtechs land somewhere between fully building and fully buying: licensing a telematics device/SDK and ingestion layer from a specialist vendor, while building the feature engineering, scoring, and claims-integration layer in-house where the real competitive differentiation sits.

ApproachSpeed to marketControl over featuresOngoing engineering burdenTypical fit
Fully outsourced (vendor scores + pricing feed)FastestLowestLowestEarly pilots, proving product-market fit
Licensed ingestion + in-house feature/scoring layerModerateHighModerateMost scaling insurtechs
Fully in-house (device SDK through to scoring)SlowestHighestHighestInsurers with existing data engineering depth

There's no universally correct answer — it depends on how much of the behavioural scoring logic is actually your competitive advantage versus how much is commodity infrastructure.

What does a sensible architecture roadmap look like?

The lowest-risk path is to validate the pricing hypothesis on a licensed telematics feed before investing in bespoke ingestion infrastructure, then bring the feature engineering and scoring layer in-house once trip volume and claims experience justify the investment. Trying to build the full stack — device integration, event streaming, feature store, scoring model, claims integration — before you have enough real trip and claims data to validate the pricing hypothesis is one of the more common and costly sequencing mistakes in this space.

A realistic sequence looks like:

  1. Pilot with a licensed telematics vendor feed and a simple, explainable scoring model
  2. Build the data lineage and claims-join architecture early, even while pricing logic is still simple
  3. Invest in a proper event-streaming and feature-store layer once trip volume justifies it
  4. Bring feature engineering and scoring in-house incrementally, starting with the features that most directly drive pricing differentiation
  5. Formalise governance, retention, and access controls alongside each stage — not as a final compliance pass

This is the kind of sequencing decision that benefits from an outside technical view before committing engineering budget — our data-infrastructure and ai-engineering teams work with insurtechs on exactly this kind of pipeline and scoring-model architecture, and our ai-product-strategy work helps clarify which parts of the stack are worth owning.

If you're exploring how to build or mature a telematics and IoT data pipeline for a usage-based insurance product, we can help — starting with a focused technical review of your current data architecture and where the engineering risk actually sits.

Share

Chris Kerr

Partner at Horizon Labs, an AI product consultancy and venture studio. A commercially focused product and technology leader with 20+ years building and scaling digital platforms, teams, and businesses across SaaS, travel, eCommerce, logistics and transport, and digital marketing — operating at the intersection of product, engineering, and data. Writes about platform strategy, AI transformation, modern data ecosystems, and the operational discipline that separates AI demos from AI products.